NMRV Wrom Speed Reducer Gearbox

NMRV series worm gear reducer is a new generation of products combining the international advanced technology based on the original WP series products.It adopts advanced square box structure, high quality die-casted Aluminum alloy.lt has smallvolume,light weight, high strength, heat dissipation, attractive and durable.The reducer has big output torque, smooth transmission and low noise, it adopts all-closed structure, good sealing,free of maintenance, can adapt to comprehensive installation.

Key words:

Category：

YBX3 SERIES

E-mail：

Sales2@zhuhongmotor.com

Get Quote

Also Like

Description

FEATURES

USE AND SAFETY GUARABTEE

1.Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use toassure that it is in the safety range of worm gear reducer performance parameters.

2.Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the fist starting of 400hours and after then 4000 hours for lubricating oil replacing cycle.

3.There should be enough lubrication in worm gear box and keep regular check with the oil level.

4.When installation, please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage

5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices.

6.Please set safety covers in rotating position to avoid of injuring.

7.Please pay full attention: it is very dangerous if there is off or falling when moving.

PRODUCTS PICTURES

PRODUCTS VERSIONS

Related Products

IE1 SERIES CAST IRON MOTOR

IE 1 series iron three-phase asynchronous motor is a kind of TEFC squirrel cage motor with the national unified design, it has the characteristice of high efficiency,energysaving,hight starting torque,low noise,low vibration and easy maintenance,the geade of power and the mounting mesasurement are subject to the IEC standard.This series motor is commonly used in the machinery without special requirement specially for reducer,aircompressor,water pump,oil pump,packing and food machinery and so on.

IE2 SERIES CASTIRON MOTOR

IE2 Series high-efficiency three-phase asynchronous motor is based on the latest energy efficiency rating of IEC60034-30 standard and IEC60034-2 rotating electrical machines Part 2 "losses and efficiency of rotating electrical test measurement method".

IE3 SERIES CASTIRON MOTOR

IE3 series(IP55) super-high efficiency three phase asynchronous motor (Frame Size 80mm to 355mm), is to achieve energy efficiency limit value of Low pressure totally enclosed fan cooled squirrel cage three phase asynchronous motor.The product is used to various fields of national economy, such asmachine tools,pumps,fans,compressors, also apply to the transport, stiring, printing, agricultural machinery,and other types of food not contain flammable, explosive or corrosive gas applications. The motor is IP55,the cooling method is IC411,continuous duty"(S1). Class F protection degree insulation structure,but the full range of temperature at B level assessment; and requested the assessment load noise; H315 ～ 355 motor already has installed oiling settings.The motor rated voltage is 380V,rated frequency 50Hz,power rating 0.75~375KW,contain 2P,4Pand 6P motor.The level of the motor runplace no more than 1000m;The highest temperature is not more than 40 ℃ ,the lowest air temperature is- 15 ℃.

MSE2 SERIES ALUMINIUM HOUSING THREE-PHASE INDUCTION MOTOR

MS series aluminium housing three-phase asynchronous motors, with latest design in entirety, are made of selected quality materials and conformed to iec standard. Ms motors have good performance, safety and reliable operation, nice appearance,and can be maintained very conveniently, while with low noises, little vibration and at the same time light weightand simple construction. These motors can be used for general drive.

YC/YCL Series heavy-duty single-phase capacitors start induction motor

YC series motors are totally enclosed fan cooled heavy-duty single-phase induction motors. The mounting dimension is fully confirmed with IEC standard.When rated output is 3HP or below,motors and of capacitors,and 4HP or above with capacitor start and run.YC series Motors are integrated with up-to-date design, best quality materials construction, and possess the features of pleasantlooking appearance,outstanding performance,easy maintenance.The also concentrate the advantages of high staring torque, smooth turning, low temperatre rise, low noise and great overload performance. YC series motor are suitable for powering small type drilling machines and water pimps,especially for family workshops where only single-phase current supply is available.

ML series dual capacitors single phase motor with Aluminium body

ML series aluminium housing single-phase dual-capacitor asynchronous motors, with latest design in entirety, are made of selected quality materials and conformed to IEC standard. ML motors have good performance, safety and reliable operation, nice appearance, and can be maintained very conveniently, while with low noise, little vibration and at the same time light weight and simple construction.The competitive performance is good, the multiple of starting torque is1.8-2.5. These series motors are suitable for the occasion requiring big starting torque and high over load, such as air-compressors, pumps, fans, medical apparatus and instruments, and many other small machines.

YVF2 SERIES FREQUENCY-VARIABLE AND SPEED-ADJUSTABLE THREE PHASE INDUCTION MOTOR

YVF2 series frequency-variable and speed-adjustable three phase asynchronous motor are suitable for running in frequency change and speed regulation system which the power is supplied by a frequency converter. This new series of product desingned unitedly in the country can be maed with all kinds of SPWM frequency changer and speed regulation devices and is equipped with separate cooling fan with ensure the motor for good cooling at various speed. They can be used in machine tool,metallugic industry,textile,printing and dyeing,transportion,chemical industry,mine and for seep regulation of fans and pumps.

YEJ2 SERIES ELECTROMAGNETIC BRAKE MOTOR

YEJ2 series dc brake,designed according to IEC standard,are totally-enclosed,fan-cooled,squirrel-cage three-phase-Asynchronous motors with additional electromagnetic brake disc dc direct current. the motor with removable feet, is made of aluminum-alloy cite-casting Various mounting models available.t has a lot of advantages including beautiful modelling,compact structure,high efficiency,low noise,low vibration,etc. The brake has a manual and electrical release.

YBX3 SERIES EXPLOSION-PROOF THREE-PHASE ASYNCHRONOUS MOTOR

YBX3 Series high efficiency explosion-proof three phase induction electric motor Explosion-proof performance: suitable for hazardous locations such as flammable gas, steam, and dust. Power range: Available in single-phase or three-phase options, with a power range of 0.18kW to 315kW to meet various application needs.Reliability: Made of high-quality materials and excellent craftsmanship, ensuring stable, reliable performance and long lifespan.Energy-saving and environmental protection: Designed with high efficiency to minimize energy consumption and reduce environmental impact.Easy installation: Compatible with multiple installation methods, including horizontal installation, vertical installation, and wall-mounted installation, making it easy for users to install and maintain.Wide application: Suitable for various industries and fields such as chemical, petroleum, pharmaceutical, food,textile, paper making, printing, etc.

NMRV Wrom Speed Reducer Gearbox

FCL Flexible Couplings

Flexible Couplings Model FCL is widely used for its compact designing, easyinstallation, convenient maintenance, small size and light weight . As long as the relative displacement between shafts is kept within the specified tolerance, B couplings will operate the best function and have a longer working life . Thus it is greatly demanded in medium and minor power transmission systems driven by motors, such as speed reducers, hoists, compressor, spinning and weaving machines and ball mills.Permit table relative displacement: Radial displacement: 0.2~0.6mm; Angle displacement:0° 30'~1° 30'